BENEKOV R 100

High quality automatic pellet boiler with the performance of 99 kW. The boiler satisfies Ekodesign. It has a reservoir of 500 l. BENEKOV R100 is the only Czech, automatic pellet boiler with the performance of 99 kW with the possibility to burn renewable sources of energy in the form of wood pellets.

Výkon99 Kw
Hmotnost1350 kg
Objem zásobníku500 l
Rozměry1750x1922x2017 š x h x v
Příkon248 W
Účinnost90 %
Ekodesignano
Vhodné pro RDne
Třída4. třída
Výkon kotleDřevěné pelety
Poptat
Přednosti kotle
  • The possibilities of burning renewable sources of energy in the form of wood pellets.
  • Mechanical feed of fuel from the in-built tank into the combustion chamber.
  • Simple, non-time consuming operation and maintenance.
  • Low emission load for the surroundings.
  • 3-pass design of the boiler drum guarantees high efficiency.
  • The control unit Siemens Climatix with the lambda sensor enables control module of the performance in the whole performance range.
  • Climatix has equithermal regulation, control of 2 heat circuits and connection to the accumulation tank. The control unit can control the cascade of 4 boilers in total that can be connected together, providing up to approx. 400 kW.
  • The boiler, including the heater, can be divided into several smaller parts which simplifies its transportation to the boiler room and assembly.
  • A massive, cast iron burner provides a long lifetime.
  • The rotating fire grate, which is a part of the burner, enables the burning of pellets of a lower quality with a content of bark.
Poptat
Provoz kotle

Similarly, as for our other products, the emergency thermostat secures the safe operation of the boiler which protects the heating system against overheating. The engine of the feed is equipped with a thermal sensor. The thermal link protects the boiler from burning the fuel through the fuel tank when the power is off for a longer period of time.

Poptat
Zapojení kotle

The control unit enables the boiler to be connected to the cascade, operation of two heating circuits and connection to the accumulation tank. Recommended connecting diagrams can be downloaded from our web pages.

Poptat
Technické informace
Weight kg 1370
Water capacity dm3 370
Chimney diameter mm 250
Heat transfer surface m2 11,2
Fuel container capacity dm3 500
Boiler dimensions: width x depth x height   mm 1750x1922x2017
Size of the fuel container filling gap mm 610x1196
Class of boiler acc. ČSN EN 303-5 4
Working water overpressure bar (kPa) 2,0 (200)
Tested water overpressure bar (kPa) 4,0 (400)
Recommended working temperature of heating water °C 65 - 80
Lowest temperature of incoming water °C 60
Hydraulic loss of the boiler  
∆ T = 10 K mbar 1,5
∆ T = 20 K mbar 0,4
Noise level dB < 65dB (A)
Chimney draught mbar 0,25 – 0,35
Boiler connectors    
- heating water Js G 2”
- return water Js G 2”
Connecting voltage   1 PEN ~ 50 Hz   230 V
Electric input at nominal power W 248
Electric protection   IP 20

Poptat
Documents available for download
References

Benekov - firma s tradicí

Zkušenost, inovace, flexibilita, komunikace a moderní řešení šitá na míru našim zákazníkům. To je Benekov, výhradně česká firma s tradicí od roku 1949.

Nejlepší dostupné
technologie
Komplexní řešení
výroby energií
Nejlepší technické
řešení
na českém trhu
Špičkový servis
po celé ČR
Česká firma
a tradice
od roku 1949
Vlastní výzkum
a vývoj
VÍCE INFORMACÍ O NÁS

Moderní technologie Benekov

Využíváme nejmodernější technologie. Nabízíme nejlepší technické řešení na českém trhu. Máme vlastní výzkumné a vývojové středisko.

VÍCE informací
Kabely Podlaha LCD Kotel Solární panely Venkovní jednotka Vnitřní jednotka Lampa Větrná elektrárna

Kontaktujte nás

Chcete navrhnout ideální řešení?
Zajímá vás cena? Nebo se jen potřebujete na něco zeptat?
Napište nám prostřednictvím formuláře vpravo.
Nebo na mail info@benekov.com. Případně volejte 554 748 008.

zavřít

Kontaktujte nás

Pošlete nám nezávaznou poptávku.