BENEKOV K 14

• Hot-water boiler BENEKOV K14 is designed for heating of small or low-energy houses, cottages and other objects whose thermal loss does not exceed 15 kW.
• The most economical system of heating houses with wood pellets in the Czech republic.
• This boiler is also able to burn pellets with higher content of bark and other forms of non-standard pelletized biomass.
• The controlling unit of Benekov EM860 allows for control of a single heating circuit.
• Boilers of the K line utilize maintenance-free rotation burner, which is suitable also for burning lower-quality pellets. 
• Storage tanks of various sizes can be selected to supplement the boilers. Location of the storage tanks can be adjusted according to the dimension of a given boiler room.
• Cleaning of the boiler body and emptying the ash is necessary once in 4 or 5 weeks, depending on the season of the year and the type of fuel applied. 
• Automatic ignition is part of the base package of the boiler.
• An additional module for controlling the boiler through the Internet can be easily attached to these boilers. The module enables to monitor the operation history of the boiler and selected values of the controlling unit. 

When burning wood pellets, it is necessary to empty the ash approximately once in 4 up to 5 weeks and the fuel reservoir must be filled up once in 2 up to 6 days according to the intensity of he operation.

In case that pellets with higher content of bark are burnt in the boiler, it is necessary to carry out regular cleaning of the burner approximately once a month, which can take up to about 20 minutes.

As well as in other products of ours, safety operation of the boiler is ensured by an emergency thermoregulator, designed to protect the heating system against overheating. The engine of the snail feed device is equipped with a thermal safety fuse to avoid overloading. 

Suitable methods of connection are defined in the document Technical base materials for installation of BENEKOV boilers.

Documents available for download