BENEKOV R 101

Hot-water boiler BENEKOV R101 is designed for heating medium-sized objects - shops, schools, guest houses, office buildings, plants and other objects, whereas the thermal loss of these objects does not exceed 98 kW.

Výkon98 Kw
SVT23995
Hmotnost1575 kg
Objem zásobníku500 l
Rozměry1752 x 1969 x 2017 š x h x v
Příkon508 W
Účinnost0 %
Ekodesignano
Vhodné pro RDne
Třída5. třída
Výkon kotleDřevěné pelety
Poptat
Přednosti kotle
  • The boilers comply with the EKODESIGN requirements 
  • Peak effectiveness of the boilers oscillates around 90% within the entire effictiveness scope
  • minimum emission load for the environment
  • automated operation of the boilers
  • possibility to burn renewable resources of energy in a form of wood pellets 
  • mechanical feeding of fuel from an in-built feeder to the combustion chamber
  • operation and maintenance are simple and not time-consuming
  • low operating costs
  • Automated ignition of the boiler in the base package
  • Automated cleaning of the interchanger in the base package
  • Controlled combustion by means of a lambda-probe
  • Modulation of the thermal output in the entire effectiveness scope
  • The boiler may be, including the boiler drum, dismantled into several small units, which simplifies its transport to a boiler-room and assembly
  • modern design
  • possibility of connection fly-ash-handling device (on request)
Poptat
Provoz kotle

Similarly to other products of ours, safety operation of the boiler is guaranteed by an emergency thermoregulator, which serves to protect the heating system against overheating. The engine of the snail feed device is equipped with a thermal safety fuse to avoid overloading. Safety thermal fuse safeguards the boiler against fire penetration of the fuel into the fuel reservoir in case of a longer electric power cut. The feeding mechanism and fuel reservoir are divided by a turnstile, which prevents fire penetration to the fuel reservoir.

Poptat
Zapojení kotle

The control unit enables the boiler to be connected to the cascade, operation of two heating circuits and connection to the accumulation tank. Recommended connecting diagrams can be downloaded from our web pages.

Poptat
Technické informace
Weight kg 1575
Water capacity dm3 370
Chimney diameter mm 250
Heat transfer surface m2 11,7
Fuel container capacity dm3 500
Boiler dimensions: width x depth x height   mm 1752x1969x2017
Size of the fuel container filling gap mm 610x1196
Class of boiler acc. ČSN EN 303-5 5
Working water ovepressure bar (kPa) 2,0 (200)
Tested water overpressure bar (kPa) 4,0 (400)
Recommended working temperature of heating water °C 65 - 80
Lowest temperature of incoming water °C 60
Hydraulic loss of boiler  
∆ T = 10 K mbar 1,5
∆ T = 20 K mbar 0,4
Noise level dB < 65dB (A)
Chimney draught mbar 0,09 – 0,15
Boiler connectors    
- heating water       Js G 2”
- return water Js G 2”
Connecting voltage   1 PEN ~ 50 Hz   230 V
Electric input at nominal power W 508
Electric protection   IP 20
Poptat
Documents available for download

Benekov - firma s tradicí

Zkušenost, inovace, flexibilita, komunikace a moderní řešení šitá na míru našim zákazníkům. To je Benekov, výhradně česká firma s tradicí od roku 1949.

Nejlepší dostupné
technologie
Komplexní řešení
výroby energií
Nejlepší technické
řešení
na českém trhu
Špičkový servis
po celé ČR
Česká firma
a tradice
od roku 1949
Vlastní výzkum
a vývoj
VÍCE INFORMACÍ O NÁS

Moderní technologie Benekov

Využíváme nejmodernější technologie. Nabízíme nejlepší technické řešení na českém trhu. Máme vlastní výzkumné a vývojové středisko.

VÍCE informací
Kabely Podlaha LCD Kotel Solární panely Venkovní jednotka Vnitřní jednotka Lampa Větrná elektrárna

Kontaktujte nás

Chcete navrhnout ideální řešení?
Zajímá vás cena? Nebo se jen potřebujete na něco zeptat?
Napište nám prostřednictvím formuláře vpravo.
Nebo na mail info@benekov.com. Případně volejte 554 748 008.

zavřít

Kontaktujte nás

Pošlete nám nezávaznou poptávku.